一、设备搬迁前
I. Before the Relocation of Equipment
1.如果工厂有专业的技术人员，最好让本公司的技术人员先对设备进行拆卸，然后分类打包，对贵重及易碎物品要进行特殊包装，并把所有的箱子都标上标签，这样能最大限度的保障设备的完好性，如果公司没有专业的技术人员，可以叫专业的搬家公司，不过这时候选好搬家公司就很重要了，选正规可信的搬家公司，他们的搬运人员都是通过专业培训的，搬运会有一套流程，会比自己动手好很多。
1. If there are professional technicians in the factory, it is better for the technicians of the company to disassemble the equipment first, then pack them in different categories, pack the valuable and fragile goods in special way, and label all the boxes, so as to maximize the integrity of the equipment. If the company does not have professional technicians, it can be called a professional moving company, but at this time. Candidates for a good moving company is very important. Choose a regular and credible moving company. Their porters are trained professionally. There will be a set of handling process, which will be much better than doing it by themselves.
2.如果是叫搬家公司，承运人应根据大型物件的外形尺寸和车货重量，在起运前会同托运人勘察作业现场和运行路线，了解沿途道路线形和桥涵通过能力，并制定运输组织方案。涉及到其他部门的应事先向有关部门申报并征得同意，方可起运。
2. If it is called a moving company, the carrier shall, in accordance with the shape and size of large objects and the weight of the vehicle and cargo, survey the operation site and route with the shipper before embarking, understand the alignment of the road along the way and the capacity of the bridge and culvert, and formulate the transport organization plan. When other departments are involved, they should declare in advance to the relevant departments and obtain their consent before they can be shipped.
二、设备搬迁中
II. Equipment Relocation
1.设备搬迁需要明火操作时，必须有防火措施，并有专人监护，在易燃、易爆物周围，要严格禁止明火作业，严格遵守防火规定。
1. When equipment relocation requires open fire operation, fire prevention measures must be taken jinan.89ix.comtaiyuan.89ix.comchangsha.89ix.comnanjing.89ix.comand special guardianship must be yinchuan.89ix.comzhengzhou.89ix.comprovided. Around flammable and explosive materials, open fire operation should be strictly prohibited and fire prevention regulations strictly observed.
2.尽量避免交叉作业，高空作业必须携带安全带，安全带悬挂必须符合安全规程要求。
2. Avoid crossover operation as far as possible. Seatbelt must be carried in high altitude operation. Seatbelt suspension must meet the requirements of safety regulations.
3.装车过程中注意容易磕碰的地方要采取减震措施，仪器脆弱的部分做特殊护理，一般采用气垫膜、毛毯等打包材料。
3. Attention should be paid to the areas which are easy to bump during loading. Special care should be taken for the fragile parts of the instrument. Packing materials such as air cushion film and blanket are generally used.
4.运输过程注意匀速行驶，慢一点没关系，要保证安全到家。
4. Pay attention to driving at a uniform speed in the transportation process. It doesn't matter if you slow down. You should ensure that you get home safely.
三、设备搬迁后
III. After the Relocation of Equipment
在与搬家公司结账前一定要先组织人员清点物品，进行核对看有无缺漏，贵重或易碎物品是否有损坏，如果有就要跟搬厂公司进行索赔，最好可以当着搬厂公司的面一起检查才能避免不必要的纠纷。
Before checking out with the moving company, it is necessary to organize personnel to count items, check whether there are any omissions, valuable or fragile items are damaged. If there is a claim with the moving company, it is best to check in front of the moving company in order to avoid unnecessary disputes.