Move to prepare for work

1、冰箱搬家前一天将插头拔去，除霜以去水份，搬移新居定位后，请放置30分钟后再行通电。

1. Remove the plug one day before moving the refrigerator. Remove the moisture from the refrigerator and move the new house. After placing it for 30 minutes, it will be energized.

2、电视机先用棉被捆邦于萤幕上保护；再用胶带将电视插头绑好固定。

2, the TV is first protected by the cotton quilt on the screen; then the TV plug is fixed and fixed with adhesive tape.

3、电脑把你的所有文档都存入软盘或压缩文件，用电脑专用的箱子和保护材料装好，要注意远离电视、音响和其他一些可能产生磁场的电器；若没有，要用泡沫块装好并放入纸箱里（比如聚苯乙烯泡沫塑料、毯子、折皱的纸等），在外面注明电脑，这样可确保将您的电脑安全快捷的送到目的地，也能让您更放心更安心。

3, the computer saves all your documents into a floppy disk or compressed file, with a computer special box and protective material, and be careful to keep away from the TV, audio, and other electrical appliances that may produce a magnetic field. If not, put it in a foam block and put it in a carton (such as polystyrene foam, blankets, wrinkled paper, etc.) The computer is shown on the outside. This ensures that your computer can be sent to your destination safely and quickly, and you can feel more comfortable and secure.

4、打印机用原来的箱子装好，把调色板和托盘从激光器或喷墨打印机上取下业，再用一张纸插入针打印机的压纸卷筒内。

4, the printer is loaded with the original box, taking the palette and tray off the laser or ink jet printer, and inserting a piece of paper into the press paper drum of the needle printer.

5、照明器具先将灯具装箱，并且在灯具周围放些报纸让其固定；不用封盒，使搬运者能看见。

5, the lighting fixture first lights the box, and put some newspapers around the lamps to make it fixed; no need to seal the box,pikaiz.89ix.comshuigongz.89ix.com jiarebang.89ix.com jiareguan.89ix.com gaibanp.89ix.comlashenyou.89ix.com so that the carrier can see.

6、微波炉、烤箱装臬后，割开一孔让人能看见馐内的物品。

6. After microwave oven and oven control, open a hole so that people can see the items in the dressing.

7、音响用毛巾等物品包好装箱来保护，用胶带固定放片匣等主机。

7. The sound is packed and packed with towel and other items to protect, and the host is fixed with tape.

8、床头柜拆取下业的螺丝零件装塑胶袋里封口，用双面胶在床头板粘住，以免遗落。

8. The screw parts of the bedside cabinet are removed and sealed in plastic bags, and glue on the bedside board with double-sided adhesive so as not to be left behind.

9、桌子先用厚纸皮将四个桌角用胶带固定保护，再用绳包裹桌角以防止损坏。

9, the table first uses thick paper leather to protect the four corners of the table with adhesive tape, and then wrap the rope around the table corner to prevent damage.

10、橱柜先将抽屉里的物品取出，再用胶带将各抽屉贴好固定；取出的物品再装入纸箱、搬运起来非常方便。

10, the cupboards first remove the items in the drawers, then tape them to the drawers and stick them in place. The items that are removed are packed into cartons and transported very conveniently.